BC-55/65 Degradable material zipper bag blowing machine
Main Parameters：
Model | BC-55 | BC-65 | BC-85 |
Raw Material | LDPE(density0.921) | LDPE(density0.921) | LDPE(density0.921) |
Width | 50-450mm | 50-550mm | 50-750mm |
Thickness | 0.03-0.10mm | 0.03-0.10mm | 0.03-0.10mm |
Screw | Φ45 | Φ55 | Φ65 |
LD | 30:1 | 30;1 | 30:1 |
Main power | 7.5kw | 7.5kw | 15kw |
Vice power | 1.5kw | 1.5kw | 2.2kw |
Heart | 12kw | 15kw | 18kw |
Cooling | 1.1kw | 1.5kw | 2.2kw |
Total power | 25kw | 28kw | 30kw |
Voltage | 50Hz-60Hz 380V | 50Hz-60Hz 380V | 50Hz-60Hz 380V |
Output | 5-35kg/h | 5-35kg/h | 5-45kg/h |
Dimension (L×W×H) | 6000×1600×4500mm | 6000×1600×4500mm | 6000×1600×4500mm |
Weight | 1500kg | 1800kg | 2000kg |
Common faults and solutions of self sealing bag blowing machine
Difficulty in drawing mold for self sealing bag blowing machine:
(1) Improper temperature control of the machine head: The machine head temperature should be adjusted appropriately.
(2) Uneven discharge of the mold: The gap between the molds should be adjusted while adjusting the temperature of the machine head connector appropriately.
(3) The molten material contains impurities of coke: purify the raw materials and clean the machine head and screw.
(4) Improper control of extrusion process conditions: The process conditions should be adjusted appropriately.
Self sealing bag blown film machine bubble tube skewed:
(1) The temperature of the body and mold is too high: reduce it appropriately.
(2) The temperature of the machine head connector is too high: reduce it appropriately.
(3) Uneven discharge of the mouth mold and uneven thickness of the film: adjust the gap between the mouth mold and the temperature of the machine head connector appropriately.
Related
If you have any questions or suggestions about the product, or if you want to know more, you can contact us at any time.
WhatsApp
Website
WeChatProduct Center
Contact Us
